Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) NAT, Pipe75, stops routing.
NAT Issues:
I'm runnig 6.0 in a p50 configures for NAT and also as DHCP server.
Everything seemed to be working until we connected it to the LAN.
What happens is the gateway (in this case the p50) is assigned to
one pc ONLY, and nobody else can see it and then it stopes routing.
I can ping the router biu that is as far tha i can go.
I reseted the p50 and that did not wor either.
Claudio
===========
On Mon, 6 Apr 1998, Matt Holdrege wrote:
> For those who say they are having a problem, please post what software rev
> you have and if you've opened a ticket with the TAC. FWIW, we have a heck
> of a lot of people using NAT and they aren't all having problems.
> Personnally I use it at home and it works flawlessly. Note that the
> functionality has improved quite a bit in more recent releases. Also post
> how you are using it. There are a few different ways to set it up.
We are using NAT with routers that are nailed connections to a max4000.
The router has but one IP (no DHCP in use). NAT mapping is setup to point
to their web and mail server so all references to their site from the
outside world go through the same IP, the IP of the WAN. We are running
5.1Ap8.
What seems to happen is about every 24hrs all traffic stops going through.
Also, I really wish pinging would work when in NAT mode -- Our monitoring
software uses ping to see what is up and what is not... It does let
someone from the inside ping something in the world but I have no way of
pinging the router from the max4000 side.
I opened a ticket on Friday and had already gone home before I heard
back... I will that open ticket shortly... Next time my customer says it
stopped routing, I will try a 'hangup' on the session forcing ppp to
reconnect... I wonder if this solves anyhing.....
I consider this a disasterous problem... I hope there is a workaround or
something...
Steve
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>